Fudge-Making Mistakes and How to Fix Them (2024)

FAQs

Fudge-Making Mistakes and How to Fix Them? ›

Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture. Pay attention to the timetable specified in the recipe, and you'll get the hang of it after a batch or two.

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

By cooling the fudge prior to agitation (like in the recipes included in this article), on the other hand, you'll get much smaller, finer sugar crystals and a finished fudge with a smooth, creamy texture. Cool the mixture until it reads 120° F on the thermometer—no stirring. This can take 1 to 1/2 hours.

To fix oily, hard or grainy fudge, scoop the fudge back into a pot with about a cup of water. Cook it over low heat until the fudge dissolves. Then bring the fudge back up to the temperature specified in the recipe and follow the remaining steps. The flavor may be slightly diluted, but the texture will be improved.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard. Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft.

By letting the fudge cool without stirring, you avoid creating seed crystals. Stirring would help sucrose molecules "find" one another and start forming crystals. Stirring also introduces air, dust, and small dried bits from the walls of the saucepan—all potential seeds for crystal formation.

While you shouldn't mix the fudge mixture when it's hot, you should beat the mixture once it has been removed from the heat and cooled. Once again, turn to your candy thermometer.

How long do you boil fudge to get to soft ball stage? ›

For first-time candy makers: Look for recipes that call for corn syrup, marshmallows, or marshmallow crème. These ingredients prevent crystallization of sugar into large grains, so the texture of the fudge will remain smooth. Also, recipes using cream or condensed milk are less likely to curdle than regular milk.

Points to remember

You know it's ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.

In the oven - wrap the fudge in foil with a tiny bit of water, perhaps 2-3 teaspoons and bake at a low temperature (120-140C or 248-284F) for 10-20 minutes, or until the fudge no longer feels/looks dried out.

If fudge is left unwrapped or accidentally put in a cold area/refrigerator then the result can be hard fudge. It is possible (but not guaranteed) to reverse this process by wrapping up your fudge in several layers of clear wrap. This allows the moisture to re-permeate into the fudge & make it soft again.

We like to set this fudge in the freezer to make it quicker! Once you add the fudge to your pan it will need just 30 minutes in the freezer to set.